Vertical frequency spot welding machine
• Save energy: comparison with the use of low-frequency can reduce the power consumption, equivalent weight of transformers can be output more energy, can be used with automatic electrode holder. Suitable for welding thick workpieces and highly conductive metal. All aluminum and galvanized steel. In General, the system may accelerate the move of small volume, light weight, shorten the work cycle, is the best matching program/automatic welding machine.
l a medium-frequency transformer in a semiautomatic device can replace many low frequency transformer, reduce secondary circuit parallel situations.
l if a manual welding gun pose need over 80 to 90 kg in weight, but also suitable for matching such a transformer. For example: small-batch car/van production and small-scale test machinery and equipment manufacturing.
l to improve the power factor and reduce production costs.
l in COA a great secondary circuit could reduce interference: welding current is DC, when the secondary winding of induction/magnetic material, will not affect the welding.
l power supply units of load balancing: MF inverter spot welding machine with three-phase power and energy storage.
l pressure drop fluctuations on the grid and more resilient: some energy is stored by inverter supply load, instead of directly supplied from the grid to the load method.
l are more accurate and fast current control: compared with the low-frequency system to more and more accurate analytical parameters.
l faster to set current frequency in the adjustment of welding current can be 20 times faster than traditional technologies.
l process more reliable: most applications with DC welding solder metal would be better.
l-if system is usually more reliable than traditional technologies, you can avoid damage based on SCR system some of the damage they cause.
l to reduce operating costs, including saving energy and reducing the welding cycle.